Raisecom ISCOM2600G-HI (A) Series - Page 254

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
5 IP services
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
223
Raisecom#hostname SwitchA
SwitchA#config
SwitchA(config)#ip route 10.1.1.0 255.255.255.0 10.1.2.4
SwitchA(config)#ip route 10.1.4.0 255.255.255.0 10.1.3.4
Step 3 Configure the default gateway on Switch B.
Raisecom#name SwitchB
SwitchB#config
SwitchB(config)#ip route 0.0.0.0 0.0.0.0 10.1.2.3
Step 4 Configure the default gateway on Switch C.
Raisecom#name SwitchC
SwitchC#config
SwitchC(config)#ip route 0.0.0.0 0.0.0.0 10.1.3.3
Step 5 Configure the default gateway of host A to 10.1.5.3. Detailed configurations are omitted.
Configure the default gateway of host B to 10.1.1.3. Detailed configurations are omitted.
Configure the default gateway of host C to 10.1.4.3. Detailed configurations are omitted.
Checking results
Use the ping command to check whether any two of all devices can ping through each other.
SwitchA#ping 10.1.1.3
Type CTRL+C to abort
Sending 5, 8-byte ICMP Echos to 10.1.1.3, timeout is 3 seconds:
Reply from 10.1.1.3: time<1ms
Reply from 10.1.1.3: time<1ms
Reply from 10.1.1.3: time<1ms
Reply from 10.1.1.3: time<1ms
Reply from 10.1.1.3: time<1ms
---- PING Statistics----
5 packets transmitted, 5 packets received,
Success rate is 100 percent(5/5),
round-trip (ms) min/avg/max = 0/0/0.