Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
peer Configure NTP peer
refclock-master Set local clock as reference clock
server Configure NTP server
After you enter a keyword, press Space bar and enter a question mark (?), the value
range and descriptions are displayed if the question mark (?) matches a parameter.
Raisecom(config)#interface vlan ?
The command output is as below.
<1-4094> Vlan number
Incomplete help
You can acquire incomplete help under following three conditions:
After you enter part of a particular character string and a question mark (?), a list of
commands that begin with a particular character string is displayed.
Raisecom(config)#c?
The command output is as below.
class-map Set class map
clear Clear buffer content
command-log Log the command to the file
console console
cpu Configure cpu parameters
cpu-protect Config cpu protect information
create Create static VLAN
After you enter a command, press Space bar, and enter a particular character string and
a question mark (?), a list of commands that begin with a particular character string is
displayed.
Raisecom(config)#show li?
The command output is as below.
To Next Page
Loading...
Need help?
General
