Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
448
Configuring Circuit ID
The Circuit ID has 2 padding modes: Switch mode and ONU mode. By default, Switch mode
is adopted. In ONU mode, the Circuit ID has a fixed format. The following commands are
used to configure the padding contents of the Circuit ID in Switch mode.
In switch mode, the Circuit ID supports 2 padding modes:

Default mode: when customized Circuit ID is not configured, the padding content is the
VLAN ID, interface number, or the attached string. If the attached string is not defined, it
is configured to hostname by default.

Customized mode: when customized Circuit ID is configured, the padding content is the
Circuit ID string.
Configure Circuit ID for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#pppoeagent
circuit-id { attach-string |
format | hex } string
Configure the attached string of
Circuit ID.
3
Raisecom(config)#interface
interface-type interface-number
Enter physical layer interface
configuration mode.
4
Raisecom(config-
gigaethernet1/1/1)#pppoeagent
circuit-id string
(Optional) configure the Circuit ID
to the customized string.
In default mode, the Circuit ID contains an attached string. By default, the attached string is
configured to the hostname of the switch. You can configure it to a customized string.
Configure the attached string of the Circuit ID for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config
)#pppoeagent
circuit-id
attach-string
string
(Optional) configure the attached string of the Circuit ID.
If the Circuit ID is in default mode, attached string
configured by this command will be added to the Circuit
ID.
Configuring Remote ID
The Remote ID is padded with a MAC address of the switch or a client. In addition, you can
specify the form (binary/ASCII) of the MAC address.
Configure the Remote ID for the ISCOM2600G-HI series switch as below.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English