Raisecom ISCOM2600G-HI (A) Series - Page 482

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
451
Raisecom(config)#pppoeagent circuit-id attach-string raisecom
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#pppoeagent circuit-id user01
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#pppoeagent remote-id client-mac
Raisecom(config-gigaethernet1/1/2)#pppoeagent remote-id format ascii
Raisecom(config-gigaethernet1/1/2)#exit
Step 3 Enable Tag overwriting on GE 1/1/1 and GE 1/1/2.
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#pppoeagent vendor-specific-tag
overwrite enable
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#pppoeagent vendor-specific-tag
overwrite enable
Raisecom(config-gigaethernet1/1/2)#exit
Step 4 Enable global PPPoE+, and PPPoE on GE 1/1/1 and GE 1/1/2.
Raisecom(config)#pppoeagent enable
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#pppoeagent enable
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#pppoeagent enable
Checking results
Use the show pppoeagent command to show PPPoE+ configurations.
Raisecom#show pppoeagent
Global PPPoE+ status: enable
Attach-string: %default%
Circuit ID padding mode: switch
Port :gigaethernet1/1/1
State :enable
Overwrite :enable
Format-rules :binary
Remote-ID :client-mac
Circuit-ID :(21ra
Port :gigaethernet1/1/2
State :disable