Autopilot system 8 Vehicle guidance setup
Select a vehicle
1.
At the Home screen, tap . The Configuration screen displays.
2.
Select Autopilot (Vehicle) and tap Setup. The Vehicle Controller Setup screen displays.
3. Tap Edit. The Edit Vehicle screen displays.
4.
From the Vehicle Profile Location list, select the source of the pre-configured vehicle profile you
want:
ll Autopilot Trimble equipment database: The majority of vehicle profiles are stored on the
Autopilot controller.
l Vehicle profile database file: As additional profiles become available or are updated, they
are added to a vehicle profile database. You can download the database and load profiles
from it.
l
Saved file: You can install an individual vehicle profile that you configured previously and
saved. See Save vehicle profile (page 190).
For Vehicle Profile Location,
if you choose...
Then...
Trimble Equipment Database
a. Tap the vehicle type and then tap
Select
.
b. Tap the vehicle make and then tap
Select
.
c. Tap the vehicle series and then tap
Select
.
d. Tap the vehicle model and then tap
Select
.
e. Tap options and then tap
Select
.
f. Tap
OK
.
g. Tap
Use Vehicle
.
From Database (new)
a. Tap
Browse
.
b. Select the .vdb file you want.
c. Tap
OK
.
d. Tap
Use Vehicle
.
From Saved File (existing)
a. Tap
Browse
.
b. Select the file you want.
c. Tap
OK
.
d. Select
Save Vehicle
to save the new settings.
168 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...