Water Management functionality 18 Operations
Status Item Explanation
Heading Current direction the vehicle is heading in
Latitude Latitude as recorded by the GPS receiver
Longitude Longitude as recorded by the GPS receiver.
Network ID Network ID of the GPS receiver, which must be the same as the base
receiver network ID.
North Difference in the North component from the Local Tangent Plane
(LTP).
Offset Relative offset in the vertical component.
Offset X Relative offset in the X axis.
Offset Y Relative offset in the Y axis.
Satellites Amount of satellites in the GPS/GLONASS solution.
Section Line Number Line number selected for design in AutoSlope. This is the current
section line being recorded in the field.
Speed Current speed of the vehicle.
Survey Cut / Fill Cut/fill for the location of the vehicle within a field that has been
processed in AutoPlane.
Target Height Height the blade will attempt to reach. This is the design height ±
the offset. When the blade reaches the target height, the arrows
turn green.
Up Difference in the up component from the Local Tangent Plane (LTP).
VDOP Vertical dilution of precision. Vertical component of PDOP.
Vertical Error Estimate Current estimate of error in the height calculated by the FieldLevel
GPS receiver.
448 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...