Water Management functionality 18 Operations
Settings Tab Explanation
Outlet Elevation Elevation of outlet depth.
Smoothing The required smoothing level (None, Low, Medium, High) to
work out any humping sections in the design. It is
recommended you use either
Low
or
Medium
smoothing.
Measure Output
button Tap to show the outlet depth and outlet elevation layers
with the current boot depth in relation to the surveyed
surface.
Distance Tap the design graph or enter a distance to display the
Design Info (depth, elevation, slope, surface) for that
location.
7. On the Edit Line tab, you have the options to:
a. Indicate fixed points on the line. See Add a fixed point (page 464).
b. Clip and remove sections of the line. See Clip a portion of a section line (page 463).
8. Tap OK.
At the Run screen, you can install the tile or clean the ditch from either the outlet or the top end of
the profile. The section line that you use for installation or cleaning will display as red on the screen
(other section lines are white).
462 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...