Basic system settings 3 Basic settings
c. Repeat steps a and b until you have all the items you want, or the list is full. The
information displays in the left field.
2. Set the right Info text items:
a. From the Info Items list, tap the item you want to use.
b. Tap the right ^ Set Item button.
c. Repeat steps a and b until you have all the items you require, or the list is full. The
information displays in the right field.
3. To save the configuration, tap OK.
Status option list
The following list shows the status items you can choose to display on the Run screen. The status
items available depend on the optional features/plugins that are currently activated.
In the Display Setup screen, select Status Items and then tap Setup.
Status Item Explanation
(blank) Status text item is not shown
Along Track Error
Altitude Current height of the vehicle
Applied Rate Current application rate
Area to Empty Area that can still be applied before the tank is empty
Auxiliary Valve Current status of the auxiliary valve
Available Memory Amount of free space on the display's internal memory
Average Population Average rate across all rows
Avg Seed Spacing Average distance between seeds based on the average sample size
Blade Height Current height of the blade
Boot Depth Depth of the boot when installing tiles or the depth of the blade
when cleaning surface ditches (used with the Autoslope leveling
model)
CH1 - CH4 Product Level Current level of the products that are in channels 1-4
Client Name Name of the current client
CMR Percent Percentage of radio CMR packets received over the last 100 seconds
Control Speed Speed reported to the multi-application controller
72 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...