Xerox WorkCentre 6505 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only I – 5
Index
L
LAN Connector
location, SFP, 1-6
Laser Diode
operation, 2-32
Laser Unit, 2-5
cleaning, 7-3
components, 2-32
light quantity control, 2-43
location, 2-32
operation, 2-5, 2-32
part number, 9-22
removal, MFP, 8-92
removal, SFP, 8-86
Left Front Holder
removal, 8-30
Left Imaging Unit Restraint Block
part number, 9-22
removal, 8-95
Left Side Cover
part number, MFP, 9-10
part number, SFP, 9-6
Left Side Cover removal, MFP, 8-37
Left Side Cover, SFP
removal, 8-18
Left Side Harness
part number, SFP & MFP, 9-17
life count
Fuser, 6-10
Imaging Unit, 6-10
Toner Cartridge, 6-10
Transfer Belt, 6-10
Linearity, 5-53
Link Spring removal, SFP, 8-23
Lower Link Pivot Shaft, SFP
part number, 9-8
Lower Scanner Cover removal, 8-46
LVPS, 2-38
location, 2-38
overcurrent protection, 4-68
overvoltage protection, 4-68
part number, MFP, 9-36
part number, SFP, 9-32
removal, MFP, 8-145
removal, SFP, 8-124
testing, 4-69
M
Magnification, 5-54
Main Drive Assembly, 2-36
location, 2-36
part number, 9-28
removal, 8-114
testing, 4-29
Main firmware
update, A-17
Maintenance items
replacement, 8-6 to 8-14
Maintenance tools, 7-2
Manual Feed, 1-4, 1-5
no paper sensor
removal, 8-78
no paper sensor actuator
part number, 9-19
removal, 8-82
no paper sensor operation, 2-27
registration sensor operation, 2-27
MCU Board, 2-39
location, 2-38
operation, 2-39
part number, MFP, 9-38
part number, SFP, 9-32
removal, MFP, 8-160
removal, SFP, 8-138
Media
curl, A-14
damage, 5-34
detection, 2-30
drive diagram, 2-14
edge detection, 2-30
grain, A-15
moisture content, A-14
path, 2-15
path, ADF, 2-67
recommended, A-15
sensing, 2-19
size detection, 2-43
texture, A-14
unacceptable, A-15
weight, A-14
Media specifications
ADF, 1-30
Duplex Unit, 1-29
Manual Feed Slot, 1-29
Tray 1, 1-28
Tray 2, 1-28
Memory
connector, 1-6
location (MFP), 2-42
location (SFP), 2-40
maximum, 1-21
minimum, 1-21
part number, 9-30, 9-34
Specifications, 1-21
supported types, 1-12
Menu
diagnostic, 4-9
menu map
Service Mode, 4-9
Menu Map, user
MFP, A-3
SFP, A-2
MFP System Configuration, 2-63
Microswitch, 2-18
Modes
operation, 2-43

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi