WindO/I-NV4 User’s Manual 28-35
3 FTP Client Function
28
Maintenance
• Files cannot be copied or moved from the FTP server to the FTP server.
• When transferring files from external memory to external memory and HMI special internal relay LSM67 is
0, subfolders can be copied and moved up to five folders deep. When HMI special internal relay LSM67 is
changed from 0 to 1, subfolders cannot be copied or moved.
• Path delimiters and characters in the folder path configured by Fixed or Specify the Location by
Value of Device Address that cannot be used vary based on the model.
• Folder path that exceed the limits in Specify the Location by Value of Device Address and folder or
file path configured with characters that cannot be used are as follows.
- When the text of the folder or file path exceeds the maximum number of device addresses (no NULL),
the text stored in device addresses up to the maximum number of device addresses from the start is
configured.
- When a character that cannot be used is set, the text is up to that character.
• If the transfer destination is a MICRO/I configured as an FTP server, "A + delimiter" or "B + delimiter"
must be specified at the beginning of the path for each type of external memory. Path delimiters vary
based on the model.
Example 1: If the transfer destination is the “ALARMLOG” folder in the “HGDATA01” folder on the USB
flash drive inserted in USB2 for HG2J-7U:
B/HGDATA01/ALARMLOG
Example 2: For HG5G-V, if the transfer destination is the “ALARMLOG” folder in the “HGDATA01” folder
on the SD memory card:
A\HGDATA01\ALARMLOG
Model
HG2J-7U
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P
Delimiter Characters that cannot be used
" # $ & ' ( ) * : ; < > ? \ ` | ~
" * : ; < > ? |
/
\
To Next Page
Loading...
General