WindO/I-NV4 User’s Manual 28-71
5 Social Media Function
28
Maintenance
■ Social Media Function
Selects whether or not to use the social media function.
Example: The Number of the social media message is 1, Rising-edge is selected as Trigger Type in Trigger
Condition and LM100 is set to Device Address, LM101 is set to (Report Device Address).
When the value of the device address LM100 set as the trigger condition changes to 1, the social media
message number 1 is in "Waiting" status. The value of the Report Device Address LM101 changes to 0 when
the send process starts, and the value of the Report Device Address LM101 changes to 1 when the send
process completes.
■ Character Code
Enable: Sends a social media message when the trigger condition is satisfied.
Disable: Social media message is not sent.
Report when sending has been done: Select this check box to report when the social media message has been sent.
(Report Device Address): Specifies the bit device or the bit number of the word
device for reporting when the social media message
has been sent.
Click to display the Tag Editor. For the device
address configuration procedure, refer to Chapter 2
“5.1 Device Address Settings” on page 2-70.
Trigger Condition is satisfied
Value of Device Address LM100
when Trigger Condition is Rising-edge
1
0
Value of Report Device Address
LM101
1
0
Social media message cannot be sent Social media message can be sent
Waiting for sending
Waiting for sending error check
Waiting for sending/sending completion
Social media message
(No.1)
Sending
Sending
completion
Sending
start
Even when an error occurs during sending, the system regards the sending is completed, and the value of
the Report Device Address changes to 1.
Message: The character code used in (Message) of Social Media content is fixed to Unicode (UTF-8).
Value of Device Address with the "Character" selected in the "Display Type":
MICRO/I encodes the value of device address with the Character selected as the Display Type
from the source character code to the UTF-8, and displays it in the body of the social media
message. Selects the source character code from the following.
ASCII, Japanese(Shift-JIS), Simplified Chinese (GB2312), Western (ISO 8859-1),
Unicode(UTF-8)
To Next Page
Loading...
General