IDEC WindO/I-NV4 User Manual

2 PLC Program Transfer Function
29-26 WindO/I-NV4 User’s Manual
5 Press File Manager.
The file manager is displayed.
6 Press DRIVE: for the transfer source and select PLC.
7 Press DRIVE: for the transfer destination and select the external memory device inserted in the MICRO/I.
This example screen shows when an SD memory card is selected.
Main
Menu
------ ---
Offline Run
Initial
Setting
Clock
Setting
Top Page
Self
Diagnosis
System
Information
File
Manager
2010/OCT/14/THU 14:57:17
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
PLC
FORMAT
DRIVE:
SD card
FORMAT
PLC.ZLD HGDATA01 < DIR >
001 < DIR >
002 < DIR >
When PLC is selected with DRIVE: in the file manager, “PLC.ZLD” is always displayed. This is not the
program file name for the PLC connected to the MICRO/I.
Main
Menu
---
File
Manager
---
▲
DEL
▼
▲
▲
RELOAD ENT COPY
DIRECTION
▲
FILTER
ALL
FILTERS
DRIVE:
PLC
FORMAT
DRIVE:
SD card
FORMAT
PLC.ZLD HGDATA01 < DIR >
001 < DIR >
002 < DIR >

IDEC WindO/I-NV4 Specifications

General

Brand	IDEC
Model	WindO/I-NV4
Category	Organizer
Language	English