3 Analog I/O Modules
30-24 WindO/I-NV4 User’s Manual
● Control Registers
For the DR Allocation, configures the data register as the device to which each parameter of the analog I/O module
is written.
Multiple words are used starting from the configured data register. The number of words of data registers that are
used varies based on the analog I/O module model.
Used Data Registers (words)
FC6A-J2C1
FC6A-J2C4
FC6A-J4A1
FC6A-J4A4
FC6A-J8A1
FC6A-J8A4
FC6A-J4CN1
FC6A-J4CN4
FC6A-J4CH1Y
FC6A-J4CH4Y
FC6A-J8CU1
FC6A-J8CU4
4 8 16 8 8 16
Used Data Registers (words)
FC6A-K2A1
FC6A-K2A4
FC6A-K4A1
FC6A-K4A4
FC6A-L06A1
FC6A-L06A4
FC6A-L03CN1
FC6A-L03CN4
4 8 12 6