IMC CANSAS - Page 110

110 Operation
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
5. The module is now configured and its configuration is stored in the module in a way which can be read
out.
6. You can now save the database.
7. While you work with the database which also contains the configured module, you can see its
configuration.
8. Now suppose that you don't yet have this module in the database. For testing purposes you can empty
the database, delete all modules or set up a new one. That is the typical situation: the database is
empty, you have some imc CANSAS-modules already configured and want to know their configuration.
9. Now add the new modules using the Integration Assistant.
10.The modules are entered one again into the database, only this time they don't receive the standard
configuration, but the configuration read out from the module instead.