IMC CANSAS - Startup; CD-Contents; Setup-Program; Driver-Software for the PC; CAN-Bus Interface

CD-Contents 25
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
Startup
2.1 CD-Contents
2.1.1 Setup-Program
The root directory on the CD contains the file SETUP.EXE. Call this program in order to install the imc
CANSAS configuration software.
2.1.2 Driver-software for the PC / CAN-Bus interface
The imc CANSAS application supports different types of interface cards. The driver software
corresponding to the card used can be found on the CD in the directory \Driver. It reflects the respective
latest edition of the driver at the time of the imc CANSAS-CD's manufacture. As a rule, the current driver
editions are provided by the manufacturer of the circuit boards as a CD or other hard copy, or are offered
for download from the Internet.