458 General Technical Specs
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
General technical specs for SL modules
Built-in signal processor for online data compression, filtering, statistics and generation of virtual
channels.
Configurable by means of optional configuration software.
Synchronized sampling of all measurement channels.
Automatic activation upon application of supply voltage.
16-bit resolution.
Number of virtual channels <100. Depending on the module, a certain number of virtual channels
are already used internally. Those channels reduce the number of available virtual channels.
Condensation allowed. (unless otherwise indicated)
Shock resistance MIL STD810F (without connector pods).
Isolation strength to power supply and CAN-bus: ± 50 V (unless otherwise indicated).
Protection class IP65
TEDS base isolation
Power supply 10 V to 50 V, DC,
power consumption 4W (unless otherwise indicimc µ-CANSASated)
Unless otherwise indicated, the technical specs given are valid for the following ambient conditions:
temperature 23°C
air pressure 1013 mbar
relative humidity 40%