IMC CANSAS - Module - Two-Point-Scaling

98 Operation
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
3.4.4.6 Module - Two-point-Scaling
Purpose:
Scaling is defined by measuring two signal levels. The user gives the unit and the expected set point. The
two points will be measured in succession and entered with the buttons Measured Point 1! and
Measured 2!.
In the Assistant mode Offset, only the scaling offset is recomputed while the scaling factor remains
unchanged.