IMC CANSAS - View - Adjust; View - Group by; View - Expand All Branches;Collapse All Branches

To Next Page

To Previous Page

88 Operation

3.4.3.4 View - Adjust

Purpose: Alters the Properties window size to accommodate all settings' entries.

Shortcuts

Toolbar:

Remarks: Since the size of the application window is adjustable and the Module Tree window's width

can also be adjusted at the expense of the Properties display, it can occur that the Properties display is

partly obscured. This command ensures that all elements of the Properties display remain in view.

3.4.3.5 View - Group by

Purpose: Groups the Module Tree entries by message or channels

Shortcuts

Toolbar:

By message: This is a command which restructures the Module Tree. The entries for a module's channels

are ordered to reflect their channels' arrangement within the CAN-Bus messages. All defined messages

are arrayed under the CAN-Bus Interface entry. There is also still an entry Without CAN-Bus Message,

which comprises all channels not yet assigned to a message and which therefore cannot be transferred.

Once a CAN-Bus-message's entry is opened, the constituent channels' entries are seen. The order of their

listing reflects their arrangement within the CAN-message.

In this mode, channels can be assigned to and deleted from messages by means of Drag & Drop

operations.

By channels: This is a command which restructures the Module Tree. The entries of a imc CANSAS

module are sorted into the groups

CAN-Bus Interface

Input/output stage

Virtual channels.

The group CAN-Bus Interface contains all defined messages.

The group (Analog/Digital) inputs contains all input channels; the group (Analog/Digital) outputs all

output channels.

The heading Virtual channels represents all virtual channels defined as well as certain special channels

(LED-triggering).

This mode is more convenient for making simultaneous settings for input/output channels and virtual

channels.

Note

In this mode, it's not possible to assign channels to messages. For that purpose, use the Grouped

by Message mode.

3.4.3.6 View - Expand all branches/Collapse all branches

Purpose: Show or hide all branches of the module tree.

Shortcuts: Ctrl + Num + / -

Other manuals for IMC CANSAS