IMC CANSAS - View- Menu; Module- Menu

54 Operation
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
3.2.1.3 "View"- menu
The menu's commands are as follows:
Command
Action
Toolbar
Toggles toolbar ON/OFF
Status bar
Toggles status bar ON/OFF
Split
Splits the active window into two segments
Adjust
Adjusts the window size to make all entries on the right side visible
Grouped by
messages
channels
Groups the entries in the tree by message
Groups the entries in the tree by channel
Expand modules
Expand all branches of selected modules
Expand all branches
Expand all branches of all modules, without regard of selection
Collapse all branches
Collapse all branches of all modules
3.2.1.4 "Module"- menu
The menu's commands are as follows:
Command
Action
Integrating-Assistant…
Integrates one or more imc CANSAS modules into the database
Find selections...
Finds selected CAN-Bus-connected imc CANSAS modules
Find me...
Let the selected module red blinking for 5s
Check configuration…
Verifies the configuration
Configure…
Configures imc CANSAS modules
Configure + Shift
Configures imc CANSAS modules even if configuration has not been changed.
Measure
Conducts a measurement using the imc CANSAS modules
Sensors:
Prepare plug-in
Read identifying data
Set the module to default values. Afterwards sensors can be connected.
Read the information from the EPROMS connected to the sensors.