The user interface 55
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
3.2.1.5 "Extra"- menu
The menu’s commands are as follows:
Adjusting the PC / CAN-Bus interface
Dialog to set global options
3.2.1.6 "?"- menu (Help)
The menu's commands are as follows:
Shows the application version number
3.2.1.7 Control Menu
The Control menu is located on the title bar and comprises the following commands:
Restores the size and position of a window to its state before the command Maximize or Minimize
was implemented.
Once the arrow pointer appears, the window position can be shifted by using the arrow buttons.
Note: the command is not available if the window is already in Maximize-mode.
Once the arrow pointer appears, the window size can be altered by using the arrow buttons.
Note: the command is not available if the window is already in Maximize-mode.
Reduces the active window to an icon.
Makes the active window fill the screen.
To Next Page
Loading...
