IMC CANSAS - Important Information; Safety Notes; Special Symbols Used in this Manual; Symbols Displayed on the Device

Notes / Quality Management / Customer Support 19
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
1.4 Important information
Required Reading!
1.4.1 Safety Notes
If you have any questions concerning whether or not you can use this device in its intended environment,
please contact imc hotline .
The device has been carefully designed, assembled and routinely tested in accordance with the pertinent
safety regulations and has left imc in perfect operating condition. To maintain this condition and to
ensure continued danger-free operation, the user should pay particular attention to the remarks and
warnings made in this chapter. In this way, you protect yourself and prevent the device from being
damaged.
The technical specifications claimed in this manual are valid for 1 year after delivery under normal
operating conditions. Be careful to observe the specified operating temperature range.
Read the instructions before turning the device on for the first time! Retain and attend to any
configuration booklet which may have been included with this manual.
Knowledge of the module type and its pin configuration is essential to operation.
The rated technical specifications presented in the chapters of this manual are valid for 1 year after
delivery of the system under normal operating conditions. Observe the specified ambient temperature
conditions.
1.4.1.1 Special Symbols Used in this Manual
The following symbols have been used in this manual:
Caution!
Pay particular attention to texts marked with this symbol. Failure to observe this warning may lead to
personal injury, cause damage to the device/ system or lead to the loss of data.
Note
General or helpful advice pertaining to the current topic. The hints often contain tips relevant to practical
applications.
The Remarks symbol is followed by general or additional information pertaining to a specific topic.
1.4.1.2 Symbols displayed on the device
The following symbols appear on the imc CANSAS device:
Caution! Refer to the User's Manual. This symbol advises the user to consult the User’s
Manual for more information concerning possible dangers.
16