IMC CANSAS - Edit - Delete; View; View - Toolbar; View - Status Bar

Menu functions 87
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
3.4.2.7 Edit - Delete
Purpose: Deletes a imc CANSAS module, a CAN-message or a virtual channel.
Shortcuts
Toolbar:
Keyboard: Del
Prerequisite: Virtual channels, CAN-messages and imc CANSAS modules can be deleted when they are
selected. This function cannot be applied to other entry types.
If the imc CANSAS module entry is selected (either alone or together with other entries), the module is
deleted along with all its subordinate entries.
Deletion of entries means removing them from the database. Using the command 'New', they can be
readmitted to the database.
A prompt for confirmation will be posted before the deletion is carried out.
The command works in both Module Tree grouping modes.
3.4.3 View
3.4.3.1 View - Toolbar
Purpose: Toggles the toolbar On/Off
Remarks: When the toolbar is in the 'On' mode, a checkmark appears next to this menu item. The
commands symbolized by the toolbar's icons are the most commonly needed commands in imc CANSAS.
3.4.3.2 View - Status bar
Purpose: Toggles the Status bar On/Off
Remarks: The status bar gives a short description of the workings of the currently selected menu item or
currently pressed softkey, and also displays the current time and date. When the status bar is in the 'On'
mode, a checkmark appears next to this menu item.
3.4.3.3 View - Split
Purpose: Allows changing the size of the Module Tree window and of the Properties window.
Procedure: After calling this command the mouse or the ARROW BUTTONS can be used to shift the
window divider position. As soon as repositioning is complete, click the mouse or press <ENTER> to
confirm the position. Pressing <ESC> causes the original window divider position to be restored.
The same effect can be achieved simply by positioning the mouse pointer over the window divider,
waiting until the cursor takes on this appearance: , and moving the mouse to reposition.