IMC CANSAS - P8 (Pressure)

HVCI8 493
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
7.16 P8 (Pressure)
Datasheet Version 1.5 (8 pressure measurement inputs)
Parameter
Value (typ. / max.)
Remarks
Inputs
8
Measurement modes:
absolute pressure
relative pressure
Sampling rate/ channel
1 kHz (max.)
Resolution
16Bit
Absolute pressure measurement
Measurement uncertainty
Remarks
Input range
+0.5 bar to 10.0 bar
+0.5 bar to 3.5bar
+0.8 bar to 1.2bar
internal barometer
< 0.2 %
< 0.2 %
< 0.2 %
< 0.1 % abs.
< 0.1 %abs.
< 20 mbar
< 7 mbar
< 12 mbar
< 1.2 mbar
< 1.2 mbar
10°C to 60°C; input range determined by
the built-in sensor; mounting position see
outline of description of the module .
1
Relative pressure measurement
Measurement uncertainty
Remarks
Input range
-0.3 bar to +0.3 bar
-0.5 bar to +9.0 bar
-0.5 bar to +2.5 bar
-0.2 bar to +0.2 bar
< 0.3 %
< 0.2 %
< 0.25 %
< 0.6 %
< 1.8 mbar
< 21 mbar
< 8.2 mbar
< 2.4 mbar
10°C to 60°C; uncertainty specs pertain to
range
pressure sensor
derived by means of intern. barometer
“
“
Parameter
Value (typ. / max.)
Remarks
Medium hookup
Leak-free
3
quick-release nipples
5 stainless steel, perfluorine rubber (FFKM)4
5 chrome-plated brass, FFKM
designed for:
gases, fuels, oils, water
fuels
Non-leak-free
5 or 7,2, stainless, fluorine rubber (FPM, FKM)
5
5, brass, butadiene acrylonitrile rubber (NBR)
6
gases, oils, water
gases
Mating cycles
1000
with regular lubrication
Overload protection
min.
max.
Input ranges
0 bar to +10.0bar
0 bar to +3.5bar
+0.8 bar to +1.2bar
-0.3 bar to +0.3bar
+0.5 bar
-0.5 bar
+15 bar
+5 bar
+1.5 bar
+0.5 bar
Material temperature:
0°C to +100°C Perfluorine rubber (FFKM)
-15°C to +100°C Fluorine rubber (FPM, FKM)
4
0°C to +100°C butadiene acrylonitrile rubber (NBR)
5
0°C to +100°C Ethylene Propylene
The upper limits are determined
by the pressure sensors.
Sealings not used in standard
models
350