Features and modules 227
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
5.7 Calibrating the modules
There are two stages of calibration reminders. First there is a preliminary warning which begins as of x
months before the recommended calibration validity expiration. After elapse of the recommended
validity term, a due date notification indicating the last calibration date is posted.
5.7.1 Prompt for next calibration
When a new module is integrated into the system, the following message appears if the recommended
calibration date is has been reached:
Hint for comming calibration during module integration
To Next Page
Loading...
