430 Properties of the Modules
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
6.20.14 Assembly instructions for ITT VEAM with Pt100 inside of connector
For taking thermocouple measurements with Pt100 inside of the connector, you receive an junction plate
onto which a Pt100 is soldered. The order in which the parts are assembled is crucial. Connection to the
cable can take the form of either soldering or crimp connection.
PT100 junction plate for ITT VEAM
Be certain that the Pt100's contacts aren't shorted. 100 must be measured between Pins G and D!
To Next Page
Loading...