366 Properties of the Modules
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
6.16.13 Grounding
imc CANSAS P8 should be grounded. Its housing is metal and conducting, which means that grounding is
advisable for safety reasons. But grounding also makes sense for measurement-technical reasons, but
isn't totally necessary when using plastic tubes. Lack of grounding can cause noisy measurement values,
however.
For imc CANSAS-L-P8, ground connection via a bolt on the backplane is recommended.
For imc CANSAS-IP65-P8, ground connection via the plug housing is recommended.
To Next Page
Loading...
