IMC CANSAS - Measurement Mode

P8 pressure 357
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
6.16.7.3 Measurement mode
For the selected channels, the measurement mode "Pressure measurement" can be selected for
absolute pressure measurements, or "Relative pressure measurement" for measurements of relative
pressure. Note that absolute pressure sensors are also able to perform relative pressure measurements
thanks to the built-in barometer. Relative pressure sensors, by contrast, can only measure relative
pressure.
Setting the measurement mode