Important information 23
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
Various important properties of the device should be monitored at regular intervals. We recommend
annual calibration, which consists of an overall checkup of device operation. Our distribution outlets can
quote you the price for having your system calibrated in accordance with DIN EN ISO 9001.
When returning the device in connection with complaints, please include a written, outlining description
of the problem, including the name and telephone number of the sender, and a print-out of the
configuration. This will help expedite the process of problem elimination.
For questions by telephone please be prepared to provide your device's serial number and have your
installation CD, as well as this manual at hand, thanks!
A contract for system calibration can -per agreement- include a software update.
1.4.1.10 Cleaning
Watch Out
Always unplug the power supply before cleaning the device. Only qualified service technicians are
permitted to clean the housing interior.
Do not use abrasive materials or solutions which are harmful to plastics.
Do not allow liquids to enter the housing interior.
Use a dry cloth to clean the housing. If the housing is particularly dirty, use a cloth which has been slightly
moistened in a cleaning solution and then carefully wrung out.
To clean the corners, slits etc. of the housing, use a small soft dry brush.
1.4.1.11 Troubleshooting
Only qualified technicians are allowed to make repairs on the device! Unauthorized opening or incorrect
repair of the device may greatly endanger the user (electric shock, fire hazard). Devices which have been
altered or tampered with no longer comply with their license and may not be used. In case of accident
(e.g. damage to housing, terminals, modules or power supply, or exposure to liquids or foreign
substances), turn the device off immediately, unplug the power cord and inform imc's hotline .
16
To Next Page
Loading...
