224 Measurement Technique
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
imc µ-CANSAS module not run from the imc µ-CANSAS-HUB4, or not in synchronization mode:
The red LED briefly shines after startup. Next, the LEDs light up according to the user’s configuration.
Either green or red must be chosen for the configuration, not both together (as previously described in
reference to the imc µ-CANSAS-HUB4). Also note the previous note pertaining to the 4-channel imc µ-
CANSAS module.
During configuration or firmware updates, the LEDs may flicker. Upon successful completion of the
configuration or update, the LEDs resume to behave as previously described. With modules which
allow zero balancing (taring), the red LED flashes during the balancing procedure at a high flashing
frequency.
To Next Page
