CI8 isolated voltage channels with current and temperature mode 279
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
2. imc Online FAMOS (imc DEVICES) sends a message if the virtual bit Bit02 is set. In the data byte, the
value 28Hex is transmitted, which consists of the values for channel 3= 0x08H plus channel 5= 0x20H.
Balancing message in Online FAMOS
Save balance state in module:
This optional setting ensures that the balancing values are not lost once the device is deactivated.
Balance duration:
Data acquisition for determining the averaged balancing value. If the input signal fluctuates somewhat
around the rest state, a longer duration can cancel out these fluctuations.
Identifier:
A message to perform balancing must bear the identifier set here.
To Next Page
