IMC CANSAS - Page 364

364 Properties of the Modules
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
Medium
Sealant
NBR
FPM
EPDM
Soap solution.
B
A
A
Soda solution
A
A
Sodium acetate
B
D
A
Sodium bicarbonate
A
A
A
Sodium carbonate (soda)
A
A
A
sodium chloride (table salt)
A
A
A
Sodium cyanide
A
A
Sodium hydroxide 20%
D
B
A
Sodium sulfide
A
A
A
Spirits of ammonia
A
A
Sulfur dioxide, gas
D
A
B
Tar
B
A
D
Titanium tetrachloride, Titanium (IV) chloride
B
A
D
Toluene
C
A
Toluene, dry
D
A
D
Town gas
B
B
D
Transformer oil
A
A
D
Transmission oil
A
A
D
Trichloroethylene ("Tri")
C
A
D
Turbo oil MIL-L-7808
B
A
D
Vacuum (reinforced valve springs)
A
A
Vapor up to 170° C = 8,076 kp/cm²
D
D
A
Vapor up to 250° C = 40,56 kp/cm²
D
D
D
Vegetable oils
A
A
D
Water above 80° C
A
A
Water up to 80° C
B
A
A
Water, de-ionized
A
B
Water, demineralized
B
B
Water, distilled
C
B
A
Xylol
D
A
D
1 Source: "Walther Präzision Schnellkupplungssysteme" At the time stated, the information provided was correct to
the best of our knowledge; however we offer no guarantee either explicitly or implicitly that components
manufactured from these materials will function satisfactorily in the applications intended by the customer. The
customer bears sole responsibility for evaluating the components prior to using them, especially in applications in
which component failure can lead to injury and/or damage of property. Please note that the elastomer parts have a
limited lifespan and that we therefore strongly recommend a program of inspection and replacement carried out at
regular intervals. All specifications on the material are intended strictly for orientation purposes. Every application is
subjected to unique environmental influences which must be taken into account when selecting materials.