ST STM32F412 User Manual

RM0402 Rev 6 235/1163
RM0402 Interrupts and events
245
10.2.1 EXTI main features
The main features of the EXTI controller are the following:
• independent trigger and mask on each interrupt/event line
• dedicated status bit for each interrupt line
• generation of up to 23 software event/interrupt requests
• detection of external signals with a pulse width lower than the APB2 clock period. Refer
to the electrical characteristics section of the STM32F4xx datasheets for details on this
parameter.
69 76 settable DMA2_Stream6 DMA2 Stream6 global interrupt 0x0000 0154
70 77 settable DMA2_Stream7 DMA2 Stream7 global interrupt 0x0000 0158
71 78 settable USART6 USART6 global interrupt 0x0000 015C
72 79 settable I2C3_EV I
2
C3 event interrupt 0x0000 0160
73 80 settable I2C3_ER I
2
C3 error interrupt 0x0000 0164
80 87 settable RNG RNG global interrupt 0x0000 0180
81 88 settable FPU FPU global interrupt 0x0000 0184
84 91 settable SPI4 SPI4 global interrupt 0x0000 0190
85 92 settable
SPI5 SPI5 global interrupt
0x0000 0194
92 99 settable
Quad-SPI Quad-SPI global interrupt
0x0000 01B0
95 102 settable I2CFMP1 event I2CFMP1 event interrupt 0x0000 01BC
96 103 settable I2CFMP1 error I2CFMP1 error interrupt 0x0000 01C0
Table 40. Vector table for STM32F412xx (continued)
Position
Priority
Type of
priority
Acronym Description Address

ST STM32F412 Specifications

General

Brand	ST
Model	STM32F412
Category	Microcontrollers
Language	English