Xerox DocuColor 1632

6/02
2-194
DC1632/2240
10-420, 10-421
Prelaunch Training/Review
Status Indicator RAPs
10-420 Fuser Near End Of Life
Replace the Fuser Assembly in X copies.
Procedure
The Fuser Assembly was replaced.
YN
Replace the Fuser Assembly (PL 7.2)
Run the dC135 [954-804]. The initial value is 0.
YN
Replace the MCU PWB (PL 13.1).
Ensure that the LIFE setting value is 100K, turn power OFF/ON.
If the problem continues, replace the MCU PWB (PL 13.1).
10-421 Fuser End Of Life
Fuser at end of life.
Procedure
The Fuser Assembly was replaced.
YN
Replace the Fuser Assembly (PL 7.2).
Run the dC135 [954-804]. The initial value is 0.
YN
Replace the MCU PWB (PL 13.1).
Ensure that the LIFE setting value is 100K, turn power OFF/ON.
If the problem continues, replace the MCU PWB (PL 13.1).