Xerox DocuColor 1632

6/02
2-15
DC1632/2240
3-317 , 3-318
Status Indicator RAPs
Prelaunch Training/Review
3-317 IIT Software Failure
Configuration mismatch
Procedure
Change the position of the document sensor. The problem is corrected.
YN
Rewrite the NVM values.
Return to Service Call Procedures.
3-318 IIT Software Failure
Procedure
Switch the power off then on. The problem is corrected.
YN
Reinstall the software. If the problem continues, check the ESS PWB connectors. If the
check is OK, replace the ESS PWB (PL 13.1).
Return to Service Call Procedures.