6/02
2-361
DC1632/2240
103-372, 103-701
Status Indicator RAPs
Prelaunch Training/Review
103-372 IOT Sc Soft Failure
IOT Controller software failure was detected.
Procedure
Turn the power OFF/ON. The fault is cleared.
YN
Reinstall the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).
Return to Service Call Procedures.
103-701 Changed Output Bin: Side To Center
The output tray was changed (Side Tray to Center Output Tray).
Procedure
No action required.
To Next Page
Loading...
Need help?
General