6/02
2-271
DC1632/2240
16-721, 16-726
Status Indicator RAPs
Prelaunch Training/Review
16-721 Other Errors
An error occurred during printing that is not defined.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Run the same job again to check the error status and ask Support G for help.
16-726 Decomposer Auto Judgement
Cannot switch decomposer; a print Language auto judgement error occurred.
Auto Judgement Error
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Fix and select the Decomposer from the Operation Panel or with a command.
To Next Page
Loading...
Need help?
General