Xerox DocuColor 1632

6/02
2-356
DC1632/2240
103-330, 103-331
Prelaunch Training/Review
Status Indicator RAPs
103-330 ESS ROM DIMM #3 Check Failure
An ESS ROM DIMM #3 check failure was detected.
Procedure
Turn the power OFF/ON. The fault is cleared.
YN
Remove and replace the ESS ROM DIMM #3.
If the problem continues, replace the ESS ROM DIMM #3
Return to Service Call Procedures.
103-331 ESS ROM DIMM #1 Not Found
The system detected that the ESS ROM DIMM #1 was not installed.
Procedure
Turn the power OFF/ON. The fault is cleared.
YN
Remove and replace the ESS ROM DIMM #1.
If the problem continues, replace the ESS PWB (PL 13.1).
Return to Service Call Procedures.