6/02
2-374
DC1632/2240
116-330, 116-332
Prelaunch Training/Review
Status Indicator RAPs
116-330 HD File System
The system detected that the an error has occurred or the HD was not formatted during HD
check at power on.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Run the HD Diag (DC355).
If the problem continues, replace the HD (PL 13.1).
If the problem continues, replace the ESS PWB (PL 13.1).
116-332 Invalid Log Info
A failure related to log was detected.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
After removing the HD and switching power off then on. Install the HD again and turn the
power on.
If the problem continues, run the HD Diag (DC355).
If the problem continues, replace the ESS PWB (PL 13.1).
To Next Page
Loading...
Need help?
General