6/02
2-354
DC1632/2240
103-207, 103-208
Prelaunch Training/Review
Status Indicator RAPs
103-207 All Machine Codes Mismatch
At least one of the three Product codes are mismatched.
Procedure
Turn the power OFF/ON. The fault is cleared.
YN
CAUTION
ESS PWB and MCU PWB cannot be replaced at the same time.
Replace the ESS PWB (PL 13.1).
If the problem continues, replace the MCU PWB (PL 13.1)
Return to Service Call Procedures.
103-208 All Serial Numbers Mismatch
At least one of the three Serial Numbers are mismatched.
Procedure
Turn the power OFF/ON. The fault is cleared.
YN
Go to (GP 10).
Return to Service Call Procedures.