6/02
2-369
DC1632/2240
116-319, 116-320
Status Indicator RAPs
Prelaunch Training/Review
116-319 Serial
There is no serial board at the serial board initialization failure.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Reinstall the serial board.
116-320 STREAMZ Soft
Fatal error of the STREAMZ. Due to an error during the software processing, the subsequent
processes cannot be performed.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).
To Next Page
Loading...
Need help?
General