6/02
2-68
DC1632/2240
5-112
Prelaunch Training/Review
Status Indicator RAPs
5-112 Registration Sensor Inversion
The document does not actuate the DADF Registration Sensor after the Belt Motor energized
for document inversion.
Procedure
Select 1 to 1 and make a copy. The document exist the DADF.
YN
Go to the RAP for the displayed status code.
Enter dC330 [005-119] and press Start. Actuate the Duplex Sensor. The display changes.
YN
Check the circuit of the Duplex Sensor (Figure 1).
Enter dC330 [005-075] and press Start. The Registration Gate Solenoid energizes.
YN
Check the circuit of the Registration Gate Solenoid (Figure 2).
Check Following:
ï The Platen Belt for contamination, wear and a rotation failure
ï The Platen Belt for an improper tension
ï The DADF Registration Gate Solenoid for a return failure
Figure 1 Duplex Sensor CD
Figure 2 Registration Gate Solenoid CD
Figure 3 DADF Control PWB
To Next Page
Loading...
Need help?
General