6/02
2-292
DC1632/2240
16-782, 16-783
Prelaunch Training/Review
Status Indicator RAPs
16-782 Scan Server Login
Server Login Error during Scanning. Cannot log in to the Server during Scan to Server file
transfer operation.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Set the log-in name and password in the destination server.
Make correct settings for the attributes of the Job Template file.
From a client PC, set the same account as the above as a resource in CW.
16-783 Server Path
Server Path Error at Scanning. The specified path cannot be found at Scan to Server file
transfer operation.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Make correct settings for the attributes of the Job Template file.