6/02
2-328
DC1632/2240
102-350, 102-351
Prelaunch Training/Review
Status Indicator RAPs
102-350 Privilege Command
Privilege command
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-351 No FPU Exception
Exceptional FPU non-existence
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)