6/02
2-335
DC1632/2240
102-364, 102-365
Status Indicator RAPs
Prelaunch Training/Review
102-364 Parameter
Parameter error
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-365 Reserve Attribute
Reserve attribute
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)