6/02
2-339
DC1632/2240
102-372, 102-373
Status Indicator RAPs
Prelaunch Training/Review
102-372 Interface Sequence
Interface sequence failure. The initial command from the Controller was not notified for a
specified time.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
102-373 Channel
Channel failure. The channel notified from the Controller was incorrect.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
To Next Page
Loading...
Need help?
General