6/02
2-363
DC1632/2240
116-200, 116-201
Status Indicator RAPs
Prelaunch Training/Review
116-200 Main PWBA IC
An error was detected in the IC in the ESS PWB.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Replace the ESS PWB (PL 13.1).
116-201 HD
The HD was not booted due to a HD error detected on booting
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Run the HD Diag (DC355).
If the problem continues, replace the HD (PL 13.1)
If the problem continues, replace the ESS PWB (PL 13.1)
To Next Page
Loading...
