6/02
2-386
DC1632/2240
116-361, 116-365
Prelaunch Training/Review
Status Indicator RAPs
116-361 Spool Fatal HD
Fatal error of the SPL HD
The spoolCont detected an error at HD access.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Run the HD Diag (DC355).
Replace the HD (PL 13.1).
If the problem continues, replace the ESS PWB (PL 13.1).
116-365 Spool Fatal
Fatal error of the SPL
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).
To Next Page
Loading...
Need help?
General