6/02
2-388
DC1632/2240
116-368, 116-370
Prelaunch Training/Review
Status Indicator RAPs
116-368 Dump Print
Fatal error of DumpPrint
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).
116-370 XJCL
Fatal error of XJCL
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB (PL 13.1).