6/02
2-398
DC1632/2240
116-701, 116-702
Prelaunch Training/Review
Status Indicator RAPs
116-701 Execute forced separation of two sides
Due to insufficient memory, 2-Sided print is impossible.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Expand the memory or install the HD if the HD is not installed.
116-702 Perform printing by using a substitution font
[Detection Conditions] Printed with a substitution font.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on.