Anritsu MS2026C - Marker (Maximum) Peak Search; Marker (Minimum) Valley Search

:CALCulate:MARKer Subsystem VNA Commands
3-58 PN: 10580-00306 Rev. E MS20xxC PM
Marker (Maximum) Peak Search
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Description: Puts the specified marker at the maximum value in the trace. Note that
this turns on the selected marker (if it is not already on) and sets the
selected marker as the active marker.
Syntax: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Cmd Parameter: NA
Query Response: NA (no query)
Related Command: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MINimum
Front Panel
Access: Marker, Marker Search, Peak Search
Marker (Minimum) Valley Search
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MINimum
Description: Puts the specified marker at the minimum value in the trace. Note that
this turns on the selected marker (if it is not already on) and set the
selected marker as the active marker.
Syntax: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MINimum
Cmd Parameter: NA
Query Response: NA (no query)
Related Command: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Front Panel
Access: Marker, Marker Search, Valley Search